Calibration for Medical Device Manufacturers & Healthcare
QSI calibrates the inspection tools, test equipment, and production instruments that medical device manufacturers rely on, along with the pipettes, thermometers, scales, and lab equipment used by hospitals, clinics, and clinical laboratories. Our calibration laboratory in Oxnard, California, is ISO/IEC 17025 accredited. Ship your equipment to us from anywhere in the U.S., or schedule on-site calibration in Ventura County, Santa Barbara County, the Santa Clarita Valley, and Los Angeles.
Calibration for Medical Device Manufacturers
Inspection tools
Calipers, micrometers, height gages, pin gages, thread gages, optical comparators, and surface plates for incoming, in-process, and final inspection.
Related: Dimensional calibration
Electrical test and safety equipment
Multimeters, oscilloscopes, power supplies, and hipot testers used for electrical safety testing of medical electrical equipment under standards such as IEC 60601.
Related: Electrical calibration
Assembly and closure tools
Torque drivers and wrenches used in assembly, and torque watches used to check closure torque on caps and containers.
Related: Torque calibration
Bond, seal, and pull testing
Force gauges, load cells, and test stands used for bond strength, seal strength, and pull testing.
Related: Force calibration
Leak testing and cleanroom monitoring
Pressure gauges used in leak testing, and differential pressure instruments that confirm cleanroom pressure differences.
Related: Pressure calibration
Process and environmental equipment
Process ovens, freezers, and environmental chambers used for curing, storage, and aging and stability studies, plus the thermometers, data loggers, and humidity indicators that monitor them.
Related: Temperature & humidity calibration
Calibration for Hospitals, Clinics, and Clinical Labs
Hospitals and clinical laboratories depend on everyday lab and facility equipment, and programs such as CLIA and CAP accreditation expect that equipment to be calibrated or verified on a regular schedule. QSI calibrates:
Pipettes: single-channel, multichannel, and electronic. See our pipette calibration services
Thermometers, probes, and data loggers: including those used to monitor refrigerators and freezers for specimens, reagents, and medications
Freezers and ovens: calibrated on-site where they’re installed
Scales and balances: calibrated on-site. See our scale & balance calibration services
Humidity indicators: for storage areas and labs
Serving Medical Device Manufacturers and Healthcare Across the Region
From medical device manufacturers in Ventura County and the Conejo Valley to hospitals, clinics, and labs across Santa Barbara and Los Angeles, QSI supports healthcare work throughout the region, along with customers nationwide through mail-in calibration.
Calibration That Supports Your Quality System
For medical device manufacturers, calibration is a core quality system requirement:
-
ISO 13485 requires that monitoring and measuring equipment be calibrated or verified at specified intervals against traceable standards, with records of the results.
-
The FDA’s Quality Management System Regulation (21 CFR Part 820) now incorporates ISO 13485 by reference, so the same expectations apply to devices sold in the U.S.
Every QSI calibration includes a certificate documenting your equipment’s results, so your records are ready for audits, inspections, and customer reviews.
Frequently Asked Questions
-
What equipment do medical device manufacturers need calibrated?
Most medical device manufacturers calibrate their inspection tools (calipers, micrometers, and gages), electrical test equipment and hipot testers, torque drivers and torque watches, force gauges used for bond and seal strength testing, pressure gauges used in leak testing, and the chambers, ovens, and monitoring equipment used in production and testing. QSI calibrates all of these.
-
Does ISO 13485 require calibration?
Yes. ISO 13485 requires that monitoring and measuring equipment be calibrated or verified at specified intervals against standards traceable to national or international standards, with records of the results. In the U.S., the FDA’s Quality Management System Regulation (21 CFR Part 820) incorporates ISO 13485 by reference.
-
What does QSI calibrate for hospitals and clinical labs?
QSI calibrates pipettes, thermometers and temperature probes, the data loggers used to monitor refrigerators and freezers, freezers and ovens, scales and balances, humidity indicators, and other laboratory and facility equipment for hospitals, clinics, and clinical laboratories.
-
Can I mail in equipment for calibration?
Yes. QSI accepts mail-in calibration from anywhere in the United States. Ship your equipment to our Oxnard, California lab, and we’ll return it with your calibration certificate.
-
Is QSI an accredited calibration lab?
Yes. QSI is an ISO/IEC 17025 accredited calibration laboratory, accredited by ANAB (certificate AC-3452). You can view our full scope of accreditation.
Request a Calibration Quote from QSI
-
ISO/IEC 17025 accredited calibration laboratory
-
Compliant certificates with traceable data, ready for your next audit.
-
Send us your equipment list for a clear, itemized quote
-
Nationwide mail-in calibration, or on-site service across Ventura County and surrounding counties